A fully automated solution that fits into small spaces, the V-Series Flame Module.
Measuring only 7-1/2 inches tall and 3 inches in diameter at the base of the canister, this little gem is very versatile. It will also run on either natural gas or propane. Common uses are in small fire pots, wall torches, tiki torches and even within large rock features.
Simply install the included transformer (pictured below) in a dry location remote from your fire feature. Then, run low voltage wire from the transformer to the V-Series Flame Module. Plumb gas to the Fire Module and then you are all set. The module can be triggered with a wall switch, remote control, phone, etc. This might require a 3rd party device so please contact us for suggestions.
Another benefit is that it is made in the USA.
Features:
-
Intermittent pilot ignition
-
Max BTU = 25,000/hr
-
Inlet size = 1/2" FPT
-
Removable pilot/burner assembly - makes it easy to replace the hot surface igniter if it ever fails.
-
Operating voltage = 24 VAC
-
Designed for natural gas and propane (LP)
-
Inlet max gas pressure - 2 psi
-
Does not need a separate burner
-
Comes with a separate transformer to step down from 120 VAC to 24 VAC
-
Canister dimensions = 7-1/2" x 3"
|